张娟

的个人主页 http://teacher.nwpu.edu.cn/apple

  被浏览次数:2097

基本信息 The basic information

张娟

力学与土木建筑学院

博士研究生毕业

工学博士

副教授

力学

zhangj@nwpu.edu.cn

工作经历 Work Experience

1996-今 西北工业大学力学与土木建筑学院工程力学系

2005-2006,University of California, San Diego,USA,访问学者

2011.3-2012.3 University of Adelaide, Adelaide, South Australia,访问学者

 

教育经历 Education Experience

1992-1996,西北工业大学机械设计及制造专业,本科生,学士

1996-1999,西北工业大学工程力学系,硕士研究生,硕士

1999-2004,西北工业大学力学与土木建筑学院,博士研究生,博士 

教育教学 Education And Teaching

1.主讲本科生课程《理论力学》,全英文授课《理论力学》 。

2.主讲研究生课程《工程随机振动》、《工程最优化方法》、《机械振动》。

招生信息 Admission Information

招收一般力学与力学基础、工程力学专业国内外硕士研究生。

荣誉获奖 Awards Information


  1. 2016年,获西北工业大学微课比赛一等奖。

  2. 2015年,获评本科生最满意教师。

  3. 20147月,获全国第五届基础力学青年教师讲课比赛二等奖,教育部高等学校力学基础课程教学指导委员会。

  4. 20138月,第九届全国周培源大学生力学竞赛中获得优秀指导教师奖。教育部高等学校力学基础课程教学指导委员会,中国力学学会,周培源基金会。

  5. 2013年,《理论力学全英文教学与实践》,获西北工业大学校级教学成果一等奖,张娟,高行山,支希哲。

  6. 2013年3月,校讲课比赛高级职称组一等奖。

  7. 2010年,获评本科生最满意教师。

  8. 2008年,指导学生裴如男毕业设计,该生毕业论文被评为校级优秀毕业论文。

  9. 2008年,“振动控制技术”课程创新教学与实践,荣获校级教学成果二等奖,张娟,高行山,支希哲,朱西平

科学研究 Scientific Research

    主要从事动力学与控制、航天器动力学,多柔体系统动力学等方面的研究工作。曾主持西工大基础研究基金,西工大博士论文创新基金等项目多项。作为主要研究人员参加过国家自然科学基金、863高技术项目、航天基金等多项课题的研究工作。2000年以来,在国内外重要学术杂志及国际会议上发表学术论文40余篇。 

学术成果 Academic Achievements

近年来代表性论文

1.张娟,舒亚锋,刘自强,白斌,基于改进遗传算法的智能柔性机械臂压电片参数优化,应用力学学报,2015.8

2.张娟,舒亚峰,刘自强,白斌,智能柔性悬臂梁的动力学建模研究,应用力学学报,2015.1 

3.张娟,白斌,舒亚峰,刘自强,基于改进的PID算法的压电柔性机械臂振动控制,机械科学与技术,2014.5

4. Juan Zhang, Zuojun Li, Bai Bin, Lei Zhang, Analysis and Simulation of Air Drag in Vehicles Close-following, 2012 International Conference on Mechanical Engineering and Materials (ICMEM 2012), 15-16 January, 2012, Melbourne Australia

5. 张娟,田中强,王振峰,高行山,基于多学科的机载雷达罩设计优化系统及关键技术探析,西北工业大学学报,2009.10.Vol27,NO.5,717-720 

6.张娟,和兴锁,邓峰岩,李亮,编队飞行星座的地球扁率摄动和大气阻力摄动分析,应用力学学报,2006,9 

7.张娟,和兴锁,李亮,邓峰岩,编队飞行星座相对运动的运动学描述与编队构型设计,应用力学学报,2006,6 

8.张娟,和兴锁等,一种低轨道地带性覆盖双基站星座设计,西北工业大学学报. 2004,4 

学术文献 Academic Literature

1. 经典科研方法在高校课程教学中的运用探索与实践 , 2016,36(2),97-101 ,DOI:, ISSN:1009-2447
2. Three Critical Technologies of Simulation Analysis on Thermal-loads of the Radome in Flight , TRANS TECH PUBLICATIONS LTD,2011,160-162,475-478 ,DOI:10.4028/www.scientific.net/AMR.160-162.475, ISSN:1022-6680
3. An Stress Correction Method Applied to Doubly Curved Composite Laminated Plate , TRANS TECH PUBLICATIONS LTD,2011,148-149,523-528 ,DOI:10.4028/www.scientific.net/AMR.148-149.523, ISSN:1022-6680
4. Comparison of Three methods of MOM, MLFMM and PO/MOM for simulation of Variable Wall Thickness Radome , TRANS TECH PUBLICATIONS LTD,2011,268-270,946-949 ,DOI:10.4028/www.scientific.net/AMR.268-270.946, ISSN:1022-6680
5. Analysis and Simulation of Air Drag in Vehicles Close-following , TRANS TECH PUBLICATIONS LTD,2012,152-154,1438-1442 ,DOI:10.4028/www.scientific.net/AMM.152-154.1438, ISSN:1660-9336
6. 变厚度雷达罩电磁性能仿真三种方法的比较 , 2011,41(2),25-27,32 ,DOI:10.3969/j.issn.1671-654X.2011.02.007, ISSN:1671-654X
7. 基于晶体取向的镍基单晶叶片可靠性研究 , 2012,12(15),3577-3581 ,DOI:10.3969/j.issn.1671-1815.2012.15.008, ISSN:1671-1815
8. 某典型折叠机构的磨损寿命研究及优化 , 2012,12(32),8588-8591 ,DOI:10.3969/j.issn.1671-1815.2012.32.022, ISSN:1671-1815
9. T700/3234碳纤维层合板的拉伸疲劳特性分析 , 2013,(10),4-6 ,DOI:10.3969/j.issn.1001-3997.2013.10.002, ISSN:1001-3997
10. 面向国际化的理论力学英文课程体系建设初探 , 2015,(26),118-120 ,DOI:, ISSN:1674-9324
11. 基于改进的PID算法的压电柔性机械臂振动主动控制 , 2014,33(5),625-629 ,DOI:10.13433/j.cnki.1003-8728.2014.0501, ISSN:1003-8728
12. 智能柔性悬臂梁的动力学建模研究 , 2015,32(1),132-138 ,DOI:10.11776/cjam.32.01.C042, ISSN:1000-4939
13. 三维涡轮叶片气动优化方法的研究 , Journal of Mechanical Strength, Zhengzou, Henan, 450052, China,2008,30(1),63-67 ,DOI:10.3321/j.issn:1001-9669.2008.01.014, ISSN:1001-9669
14. 基于多学科的机载雷达罩设计优化系统及关键技术探析 , Northwestern Polytechnical University, Xi'an, 710072, China,2009,27(5),717-720 ,DOI:10.3969/j.issn.1000-2758.2009.05.025, ISSN:1000-2758
15. Dynamic model of two-link flexible manipulator in consideration of coupling deformation terms , Editorial Office of Chinese Journal of Mechanical Engineering,2006,42(SUPPL.),69-73 ,DOI:10.1016/j.envpol.2005.08.015, ISSN:05776686
16. 机载雷达罩动态寻优设计 , 2008,,476-481 ,DOI:, ISSN:
17. Optimum low-thrust power rendezvous between neighboring elliptic orbits considering the oblateness of earth , Northwestern Polytechnical University,2005,23(3),401-405 ,DOI:, ISSN:10002758
18. Exploring preliminarily four critical technologies of multidisciplinary design optimization (MDO) of radome , Northwestern Polytechnical University, Xi''an, 710072, China,2009,27(5),717-720 ,DOI:, ISSN:10002758
19. lade aerodynamic optimization design based on approximation method , Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China,2008,25(6),874-877 ,DOI:, ISSN:10074708
20. Wear-life analysis and optimization of a typical folding mechanism1 , Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany,2013,651,678-683 ,DOI:10.4028/www.scientific.net/AMR.651.678, ISSN:9783037856130
21. Designing twin-station LEO satellite constellation for zonal coverage , American Institute of Aeronautics and Astronautics Inc.,2004,,3099-3106 ,DOI:, ISSN:
22. Designing LEO retrograde orbit Twin-Station satellite constellation for regional coverage , American Institute of Aeronautics and Astronautics Inc., 1801 Alexander Bell Drive, Suite 500, Reston, VA 20191-4344, United Sta,2007, ,DOI:, ISSN:9781624100079
23. Optimum low-thrust power transfer and rendezvous between arbitrary neighboring orbits in the presence of J2 perturbation , International Astronautical Federation, IAF, 94bis Avenue de Suffren, Paris, 75015, France,2009,7,5257-5274 ,DOI:, ISSN:9781615679089
24. Dynamics modeling for a rigid-flexible coupling system with nonlinear deformation field , Journal of Mechanical Strength, Zhengzou, Henan, China,2006,28(6),800-804 ,DOI:, ISSN:10019669
25. Designing LEO retrograde orbit satellite constellation for regional coverage , American Institute of Aeronautics and Astronautics Inc.,2004,1,432-438 ,DOI:, ISSN:9781563477126
26. 小推力作用下非共面椭圆轨道最优转移的解析解法 , 2005,,143-148 ,DOI:, ISSN:
27. Dynamic model of two-link flexible manipulator in consideration of coupling deformation terms , Editorial Office of Chinese Journal of Mechanical Engineering,2006,42(SUPPL.),69-73 ,DOI:10.1016/j.envpol.2005.08.015, ISSN:05776686
28. Dynamics modeling and frequency analysis for a planar flexible beam with coupling deformation terms , Nanjing University of Aeronautics an Astronautics,2006,19(1),75-80 ,DOI:, ISSN:10044523
29. J2 Perturbation and the atmospheric drag perturbation of formation flying constellation , Xi''an Jiaotong University, Xi''an, China,2006,23(3),496-499 ,DOI:, ISSN:10004939
30. Dynamic analysis of rotating Timoshenko beams , AAAS Press of Chinese Society of Aeronautics and, P.O. Box 399, Beijing, China,2006,27(6),1092-1096 ,DOI:, ISSN:10006893
31. Research on the effects of microgravity vibration environment in the space lab , Chinese Vibration Engineering Society,2005,24(3),103-107 ,DOI:, ISSN:10003835
32. Dynamic modeling for flexible spacecraft appendages with nonlinear deformation , Xi''an Jiaotong University, Xi''an, China,2006,23(4),555-562 ,DOI:, ISSN:10004939
33. Dynamics modeling of the elastic beam undergoing large overall motion considering coupling effect in deformation , Editorial Office of Chinese Journal of Computational Mechanics,2006,23(5),599-605 ,DOI:, ISSN:10074708
34. 非惯性系下旋转压电层合悬臂梁的动力学建模及控制 , 2014,(3),143-147 ,DOI:10.3969/j.issn.1000-5811.2014.03.031, ISSN:1000-5811
35. 基于改进遗传算法的智能柔性机械臂压电片参数优化 , 2015,32(4),556-562 ,DOI:10.11776/cjam.32.04.B055, ISSN:1000-4939
36. Stability for Discrete Hopfield Neural Networks with Delay , IEEE COMPUTER SOC,2008,2,560-563 ,DOI:10.1109/ICNC.2008.303, ISSN:
37. Dynamic Modeling on Smart Flexible Beam with Large Overall Planar Motion , TRANS TECH PUBLICATIONS LTD,2013,387,147-151 ,DOI:10.4028/www.scientific.net/AMM.387.147, ISSN:1660-9336
38. Dynamics modeling for a rigid-flexible coupling system with nonlinear deformation field , SPRINGER,2007,18(4),559-578 ,DOI:10.1007/s11044-007-9052-8, ISSN:1384-5640
39. 深空探测器飞行动力学轨道优化计算 , 2005,(中国黑龙江哈尔滨),204-207 ,DOI:, ISSN:
40. 空间拦截最优控制的动力学建模方法研究 , 2005,(中国黑龙江哈尔滨),387-390 ,DOI:, ISSN:
41. 基于改进遗传算法的智能柔性机械臂压电片参数优化 , 0,,1-7 ,DOI:, ISSN:1000-4939
42. 机载雷达罩动态寻优设计 , 2008,(中国贵州贵阳),476-481 ,DOI:, ISSN: