李宏伟


的个人主页 http://teacher.nwpu.edu.cn/lihongwei

  被浏览次数:13385

基本信息 The basic information

李宏伟

材料学院

博士研究生毕业

工学博士

教授

材料科学与工程

工作经历 Work Experience

2014.5-至今 西北工业大学 材料学院 教授 

2009.8-2010.9 美国佐治亚理工学院 机械工程系 博士后 

2009.5-2014.4 西北工业大学 材料学院 副教授 

2007.9-2009.4 西北工业大学 材料学院 讲师

教育经历 Education Experience

1998.9-2002.7,河南科技大学,塑性成形工艺与装备(模具),学士

2002.9-2005.4,西北工业大学,材料加工工程,硕士

2003.9-2007.7,西北工业大学,材料加工工程,博士

招生信息 Admission Information

材料加工工程专业 硕士研究生、博士研究生

荣誉获奖 Awards Information

2019年1月 入选西北工业大学“翱翔青年学者计划”

2018年12月 获批陕西省杰出青年科学基金

20152月 荣获陕西省科学技术一等奖

2013年 入选教育部“新世纪优秀人才支持计划”

20129月 荣获陕西省科学技术一等奖

2012年12月 荣获国家自然科学二等奖

科学研究 Scientific Research

研究方向:

  1. 基于多尺度建模仿真的形性协同调控研究。

  2. 难变形材料复杂结构成形工艺 -组织 -性能定量关联关系与主动调控。

  3. 薄壁复杂结构多能场柔性高性能成形新原理与技术。


研究成果:

主持国家自然科学基金重点支持项目、面上项目、青年基金、国家973子课题等国家级和省部级科研项目10余项, 在国际塑性领域TOP1期刊Int J PlastIJP)、顶级期刊J Mater Process TechnolJMPT)等发表论文80余篇,SCI收录50余篇,SCI他引300多次。理论成果被评价为“足够原创性贡献”、“重要进展”、“最先进机制”;入选Elsevier热点论文3篇;受邀在本领域顶级国际会议上做Keynote和邀请报告3次,担任分会主席2次;获授权国家发明(国防)专利8项,计算机软件著作权2项。技术成果应用于航空航天单位,解决了航空航天关键构件的高性能成形制造。获国家自然科学二等奖1项(排第4)、陕西省科学技术一等奖2项(排第4、第9),获陕西省杰青、西北工业大学“翱翔青年学者”。 

学术成果 Academic Achievements

主要代表性论文:

[1] Li, Hongwei(*),Sun, Xinxin, Yang, He(*), A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys, International Journal of Plasticity, 2016, 87: 154-180. (IF=5.502)

[2] Li, Hongwei, Wu,Chuan, Yang, He. Crystal plasticity modeling of the dynamic recrystallization of two-phase titaniumalloys during isothermal processing. International Journal of Plasticity, 2013, 51: 271-291.(IF=5.502)

[3] Li,Hongwei, Yang, He, Sun, Zhichao. A robust integration algorithm for implementing rate dependent crystal plasticity into explicit finite element method. International Journal of Plasticity, 2008, 24(2): 267-288.(IF=5.502)

[4] Yan, Siliang, Yang, He(*), Li, Hongwei(*),Yao, Xuan, A unified model for coupling constitutive behavior and micro-defects evolution of aluminum alloys under high-strain-rate deformation, International Journal of Plasticity, 2016, 85: 203-229.(IF=5.502)

[5] Zhang, Xin, Li, Hongwei(*), Zhan, Mei, Mechanism for the macro and micro behaviors of the Ni-based superalloy during electrically- assisted tension: Local Joule heating effect, Journal of Alloys and Compounds, 2018, 743: 480-489.(IF=3.779)

[6] Li, Hongwei(*),Ren, Guangyi, Li, Zhijun, Feng, Lu, He Yang(*), Forming mechanism and characteristics of a process for equal-thickness in-plane ring roll-bending of a metal strip by twin conical rolls, Journal of Materials Processing Technology, 2016,227: 288-07.(IF=3.647)

[7] Li, Hongwei(*), Yao, Xuan, Yan, Siliang, He, Jing, Zhan, Mei, Huang, Liang, Analysis of forming defects in electromagnetic incremental forming of a large-size thin-walled ellipsoid surface part of aluminum alloy, Journal of Materials Processing Technology, 2018,255: 703-715.(IF=3.647)

[8] Li, Hongwei(*), Yan, Siliang, Zhan, Mei, Zhang, Xin. Eddy current induced dynamic deformation behaviors of aluminum alloy during EMF: Modeling and quantitative characterization. Journal of Materials Processing Technology, 2019, 263: 423-439.(IF=3.647)

学术文献 Academic Literature

1. 一种连续板带等厚面内弯曲成形方法 , 2013, ,DOI:, ISSN:
2. 一种连续板带等厚面内弯曲成形方法 , 2013, ,DOI:, ISSN:
3. 板带面内/空间弯曲成形多功能辊轧成形试验机 , 2016, ,DOI:, ISSN:
4. 板带面内/空间弯曲成形多功能辊轧成形试验机 , 2015, ,DOI:, ISSN:
5. 一种多功能辊轧成形试验机 , 2015, ,DOI:, ISSN:
6. Evolution of two types of ?? plates in tri-modal microstructure of TA15 alloy under varying processing conditions , Rare Metals Materials and Engineering Press,2015,44(3),527-531 ,DOI:, ISSN:1002185X
7. Macro-micro fracture mechanism of TA3 alloy under high- velocity deformation , Rare Metals Materials and Engineering Press,2015,44(9),2105-2108 ,DOI:, ISSN:1002185X
8. Simulation of cold ring rolling based on rate dependent crystal plasticity , TRANS TECH PUBLICATIONS LTD,2007,561-565(PART 3),1813-1817 ,DOI:, ISSN:0255-5476
9. Anisotropy in Cold Deep Drawing of CP-Ti Sheet , TRANS TECH PUBLICATIONS LTD,2012,560-561,965-972 ,DOI:10.4028/www.scientific.net/AMR.560-561.965, ISSN:1022-6680
10. A Polycrystal Plasticity Model and Its Application in Deep Drawing of a FCC Metal , TRANS TECH PUBLICATIONS LTD,2012,560-561,952-958 ,DOI:10.4028/www.scientific.net/AMR.560-561.952, ISSN:1022-6680
11. Multi-scale Through-process Modeling and Simulation in Precision Forming of Complex Components of Difficult-to-deform Material , AMER INST PHYSICS,2013,1532,150-157 ,DOI:10.1063/1.4806819, ISSN:0094-243X
12. Deformation characteristics of as-received Haynes230 nickel base superalloy , ELSEVIER SCIENCE SA,2008,497(1-2),283-289 ,DOI:10.1016/j.msea.2008.07.052, ISSN:0921-5093
13. Characterization of hot deformation behavior of Haynes230 by using processing maps , ELSEVIER SCIENCE SA,2009,209(8),4020-4026 ,DOI:10.1016/j.jmatprotec.2008.09.024, ISSN:0924-0136
14. Hot working characteristic of as-cast and homogenized Ni-Cr-W superalloy , ELSEVIER SCIENCE SA,2009,508(1-2),141-147 ,DOI:10.1016/j.msea.2008.12.032, ISSN:0921-5093
15. 3D finite element simulation of explosive welding of three-layer plates , SCIENCE PRESS,2011,54(5),890-896 ,DOI:10.1007/s11433-011-4314-0, ISSN:1674-7348
16. Review on cellular automata simulations of microstructure evolution during metal forming process: Grain coarsening, recrystallization and phase transformation , SCIENCE PRESS,2011,54(8),2107-2118 ,DOI:10.1007/s11431-011-4464-3, ISSN:1674-7321
17. A new model for precision control of the radius in in-plane roll-bending of strip considering rolls and stand deflections , ELSEVIER SCIENCE SA,2011,211(12),2072-2084 ,DOI:10.1016/j.jmatprotec.2011.07.003, ISSN:0924-0136
18. An efficient parallel-operational explicit algorithm for Taylor-type model of rate dependent crystal plasticity , ELSEVIER SCIENCE BV,2012,54(1),255-265 ,DOI:10.1016/j.commatsci.2011.10.018, ISSN:0927-0256
19. Static coarsening of titanium alloys in single field by cellular automaton model considering solute drag and anisotropic mobility of grain boundaries , SCIENCE PRESS,2012,57(13),1473-1482 ,DOI:10.1007/s11434-012-5002-9, ISSN:1001-6538
20. Friction factor evaluation by FEM and experiment for TA15 titanium alloy in isothermal forming process , SPRINGER LONDON LTD,2012,60(5-8),527-536 ,DOI:10.1007/s00170-011-3624-8, ISSN:0268-3768
21. 基于晶体塑性有限元方法的不同变形状态下织构演化预测 , ELSEVIER SCIENCE BV,2012,22(z2),222-231 ,DOI:10.1016/S1003-6326(12)61712-9, ISSN:1003-6326
22. A new hybrid identification method for determining the material parameters of thin-walled tube under compressive stress state , ELSEVIER SCI LTD,2013,44,49-58 ,DOI:10.1016/j.matdes.2012.07.036, ISSN:0261-3069
23. Quantitative characterization of lamellar and equiaxed alpha phases of (alpha plus beta) titanium alloy using a robust approach for touching features splitting , ELSEVIER SCIENCE INC,2013,76,6-20 ,DOI:10.1016/j.matchar.2012.11.004, ISSN:1044-5803
24. Modeling of static coarsening of two-phase titanium alloy in the alpha+beta two-phase region at different temperature by a cellular automata method , SCIENCE PRESS,2013,58(24),3023-3032 ,DOI:10.1007/s11434-013-5863-6, ISSN:1001-6538
25. 一种钛合金中等轴与片层α相复杂粘连组织分割的新方法(英文) , ELSEVIER SCIENCE BV,2013,23(08),2265-2269 ,DOI:10.1016/S1003-6326(13)62727-2, ISSN:1003-6326
26. Primary Alpha Grain Coarsening Behavior of Ti-6Al-2Zr-1Mo-1V Alloy in the Alpha plus Beta Two-Phase Field , SPRINGER,2013,22(9),2557-2566 ,DOI:10.1007/s11665-013-0537-8, ISSN:1059-9495
27. Substructure Evolution of Ti-6Al-2Zr-1Mo-1V Alloy Isothermally Hot Compressed in alpha plus beta Two-Phase Region , CHINESE ACAD SCIENCES, INST METAL RESEARCH,2013,26(5),533-544 ,DOI:10.1007/s40195-013-0161-5, ISSN:1006-7191
28. Substructure and texture evolution and flow behavior of TA15 titanium alloy compressed in the alpha plus beta two-phase field , ELSEVIER SCIENCE SA,2013,213(11),2033-2041 ,DOI:10.1016/j.jmatprotec.2013.05.020, ISSN:0924-0136
29. Modeling of discontinuous dynamic recrystallization of a near-alpha titanium alloy IMI834 during isothermal hot compression by combining a cellular automaton model with a crystal plasticity finite element method , ELSEVIER SCIENCE BV,2013,79,944-959 ,DOI:10.1016/j.commatsci.2013.08.004, ISSN:0927-0256
30. Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing , PERGAMON-ELSEVIER SCIENCE LTD,2013,51,271-291 ,DOI:10.1016/j.ijplas.2013.05.001, ISSN:0749-6419
31. 基于新晶体塑性模型预测织构演化的环件冷轧变形机制(英文) , ELSEVIER SCIENCE BV,2013,23(12),3729-3738 ,DOI:10.1016/S1003-6326(13)62923-4, ISSN:1003-6326
32. Experimental study of macro-micro dynamic behaviors of 5A0X aluminum alloys in high velocity deformation , ELSEVIER SCIENCE SA,2014,598,197-206 ,DOI:10.1016/j.msea.2013.12.001, ISSN:0921-5093
33. A new quantitative relation between deformation textures and corresponding mechanical properties of FCC metals , SCIENCE PRESS,2014,59(10),1049-1056 ,DOI:10.1007/s11434-014-0134-8, ISSN:1001-6538
34. 近α钛合金TA15在β单相区等温变形过程中不连续动态再结晶的模拟与实验研究(英文) , ELSEVIER SCIENCE BV,2014,24(06),1819-1829 ,DOI:10.1016/S1003-6326(14)63259-3, ISSN:1003-6326
35. Contributions of microstructural features to the integrated hardness of TA15 titanium alloy , ELSEVIER SCIENCE SA,2015,628,358-365 ,DOI:10.1016/j.msea.2014.12.087, ISSN:0921-5093
36. Predicting the effects of microstructural features on strain localization of a two-phase titanium alloy , ELSEVIER SCI LTD,2015,87,171-180 ,DOI:10.1016/j.matdes.2015.07.128, ISSN:0261-3069
37. Forming mechanism and characteristics of a process for equal-thickness in-plane ring roll-bending of a metal strip by twin conical rolls , ELSEVIER SCIENCE SA,2016,227,288-307 ,DOI:10.1016/j.jmatprotec.2015.09.002, ISSN:0924-0136
38. 纯钛板拉胀成形中应力状态对织构和微观组织的影响 , ELSEVIER SCIENCE BV,2013,23(1),23-31 ,DOI:10.1016/S1003-6326(13)62424-3, ISSN:1003-6326
39. Influences of material parameters on deep drawing of thin-walled hemispheric surface part , ELSEVIER SCIENCE BV,2009,19(2),433-437 ,DOI:10.1016/S1003-6326(08)60291-5, ISSN:1003-6326
40. Finite element simulation on the deep drawing of titanium thin-walled surface part , NONFERROUS METALS SOC CHINA,2010,29(1),108-113 ,DOI:10.1007/s12598-010-0019-1, ISSN:1001-0521
41. Investigation on the explosive welding mechanism of corrosion-resisting aluminum and stainless steel tubes through finite element simulation and experiments , SPRINGER,2012,19(2),151-158 ,DOI:10.1007/s12613-012-0531-4, ISSN:1674-4799
42. 锆基吸气合金烧结过程的致密化及相变 , 2008,28(6),472-474 ,DOI:10.3870/j.issn.1001-2249.2008.06.022, ISSN:1001-2249
43. 工艺参数对TAO半球件冷拉深成形的影响规律 , 2009,16(3),59-63 ,DOI:10.3969/j.issn.1007-2012.2009.03.012, ISSN:1007-2012
44. TA1球面件拉深成形的各向异性效应 , 2010,17(2),11-16 ,DOI:10.3969/j.issn.1007-2012.2010.02.003, ISSN:1007-2012
45. 钛合金塑性成形关键技术进展 , 2011,30(6),6-13 ,DOI:, ISSN:1674-3962
46. 考虑溶质原子拖拽效应及各向异性的元胞自动机法模拟钛合金单相区静态粗化 , 2012,57(7),487-497 ,DOI:, ISSN:0023-074X
47. 真空自耗电弧熔炼γ-TiAl合金铸锭凝固组织模拟 , 2012,32(10),901-904 ,DOI:, ISSN:1001-2249
48. 纯钛板拉胀成形中应力状态对织构和微观组织的影响 , 2013,23(1),23-31 ,DOI:, ISSN:1003-6326
49. TA18钛合金管材多行程皮尔格冷轧过程三维有限元模拟:Ⅰ理论解析,模型建立与验证 , NORTHWEST INST NONFERROUS METAL RESEARCH,2013,42(3),524-529 ,DOI:10.3969/j.issn.1002-185X.2013.03.017, ISSN:1002-185X
50. TA18钛合金管材多行程皮尔格冷轧过程三维有限元模拟:Ⅱ塑性变形行为分析 , NORTHWEST INST NONFERROUS METAL RESEARCH,2013,42(4),741-745 ,DOI:10.3969/j.issn.1002-185X.2013.04.016, ISSN:1002-185X
51. Ti2AlC/TiAl(Nb)复合材料热变形能力 , 2013,20(4),66-70 ,DOI:10.3969/j.issn.1007-2012.2013.04.013, ISSN:1007-2012
52. 一种钛合金中等轴与片层alpha相复杂粘连组织分割的新方法 , 2013,23(8),2265-2269 ,DOI:, ISSN:1003-6326
53. 基于新晶体塑性模型预测织构演化的环件冷轧变形机制 , 2013,23(12),3729-3738 ,DOI:, ISSN:1003-6326
54. 等厚面内弯曲成形机理及参数影响规律模拟 , 2014,21(1),94-100 ,DOI:10.3969/j.issn.1007-2012.2014.01.017, ISSN:1007-2012
55. 变形量对 TA 15钛合金组成相形态和性能的影响 , 2014,21(2),20-24 ,DOI:10.3969/j.issn.1007-2012.2014.02.004, ISSN:1007-2012
56. 近alpha 钛合金TA15在beta单相区等温变形过程中不连续动态再结晶的模拟与实验研究 , 2014,24(6),1819-1829 ,DOI:, ISSN:1003-6326
57. 金属塑性成形过程中的多尺度建模方法 , 2014,28(21),115-118 ,DOI:10.11896/j.issn.1005-023X.2014.21.022, ISSN:1005-023X
58. 不同工艺条件下TA15钛合金的三态组织中两种片层alpha相的演化 , 2015,44(3),527-531 ,DOI:, ISSN:1002-185X
59. Flow behavior and constitutive model using piecewise function of strain for TC11 alloy , Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014, China,2012,41(3),397-401 ,DOI:, ISSN:1002185X
60. Three-dimensional FE simulation of multi-strokes cold pilgering of TA18 titanium alloy tube: I theoretical analysis, modeling and validation , Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014, China,2013,42(3),524-529 ,DOI:, ISSN:1002185X
61. Three-dimensional FE simulation of multi-strokes pilgering cold roll of TA18 titanium alloy tube: II Analysis of plastic deformation behavior , Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014, China,2013,42(4),741-745 ,DOI:, ISSN:1002185X
62. 间隙对三层圆管爆炸焊接影响的数值模拟 , Harbin Research Institute of Welding, No. 111 He-Xing Lu, Harbin, China,2009,30(9),33-36,40 ,DOI:, ISSN:0253-360X
63. 混合硬化弹塑性本构关系及其在环件冷辗扩模拟中的应用 , Editorial Office of Chinese Journal of Mechanical Engineering,2005,41(7),119-125 ,DOI:10.3321/j.issn:0577-6686.2005.07.022, ISSN:0577-6686
64. 晶体材料细观本构关系数值化算法研究 , 0,,140-143 ,DOI:, ISSN:
65. Flow behavior and constitutive model using piecewise function of strain for TC11 alloy , Rare Metals Materials and Engineering Press, P.O. Box 51, Xi''an, 721014, China,2012,41(3),397-401 ,DOI:, ISSN:1002185X
66. Simulation of effects of stand-off distance on explosive welding of three-layer tubes , Harbin Research Institute of Welding, No. 111 He-Xing Lu, Harbin, China,2009,30(9),33-36+40 ,DOI:, ISSN:0253360X
67. Three-dimensional FE simulation of multi-strokes cold pilgering of TA18 titanium alloy tube: I theoretical analysis, modeling and validation , Rare Metals Materials and Engineering Press, P.O. Box 51, Xi''an, 721014, China,2013,42(3),524-529 ,DOI:, ISSN:1002185X
68. Three-dimensional FE simulation of multi-strokes pilgering cold roll of TA18 titanium alloy tube: II Analysis of plastic deformation behavior , Rare Metals Materials and Engineering Press, P.O. Box 51, Xi''an, 721014, China,2013,42(4),741-745 ,DOI:, ISSN:1002185X
69. Experimental investigation of coarsening behavior of TA15 titanium alloy in beta-phase field , Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China,2012,1,685-688 ,DOI:, ISSN:9787030338990
70. Microstructure-based modeling of duplex-phase titanium deformation through crystal plasticity finite element method , Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China,2012,1,671-675 ,DOI:, ISSN:9787030338990
71. Advances in control of unequal deformation by locally loading and theories related to precision plastic forming , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2008,15(2),6-14 ,DOI:, ISSN:10072012
72. Key problems for rate-dependent crystal plasticity applied in finite element simulation , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2008,15(1),7-13 ,DOI:, ISSN:10072012
73. Numerical analysis of defects in deep drawing of elliptical head , Hanrimwon Publishing Co., 206-3 Ojang-dong, Jung-gu,, Seoul, 100-310, Korea, Republic of,2008,,534-539 ,DOI:, ISSN:9788957081525
74. Numerical simulation of dynamic recrystallization of duplex titanium alloy by coupling cellular automata method with finite element analysis , Verlag Stahleisen GmbH,2011,,832-836 ,DOI:, ISSN:
75. A computational efficient and stable model of rate dependent crystal plasticity , Verlag Stahleisen GmbH,2011,,814-818 ,DOI:, ISSN:
76. Evolution of two types of ?? plates in tri-modal microstructure of TA15 alloy under varying processing conditions , Rare Metals Materials and Engineering Press,2015,44(3),527-531 ,DOI:, ISSN:1002185X
77. 基于晶体塑性有限元方法的不同变形状态下织构演化预测 , 2012,,222-231 ,DOI:, ISSN:
78. 基于新晶体塑性模型预测织构演化的环件冷轧变形机制 , ELSEVIER SCIENCE BV,2013,23(12),3729-3738 ,DOI:10.1016/S1003-6326(13)62923-4, ISSN:1003-6326
79. 一种钛合金中等轴与片层α相复杂粘连组织分割的新方法 , ELSEVIER SCIENCE BV,2013,23(8),2265-2269 ,DOI:10.1016/S1003-6326(13)62727-2, ISSN:1003-6326
80. Elastic-plastic constitutive relation with hybrid hardening and application in cold ring rolling simulation , Editorial Office of Chinese Journal of Mechanical Engineering,2005,41(7),119-125 ,DOI:, ISSN:05776686
81. 近α钛合金TA15在β单相区等温变形过程中不连续动态再结晶的模拟与实验研究 , ELSEVIER SCIENCE BV,2014,24(6),1819-1829 ,DOI:10.1016/S1003-6326(14)63259-3, ISSN:1003-6326
82. 爆炸焊接波状结合区塑性变形机理的计算分析 , 2010,17(1),134-138 ,DOI:10.3969/j.issn.1007-2012.2010.01.029, ISSN:1007-2012
83. Ni-Cr-W-Mo合金曲母线异型件第一道次热旋成形有限元模拟 , 2010,17(2),33-38 ,DOI:10.3969/j.issn.1007-2012.2010.02.007, ISSN:1007-2012
84. 弹粘塑性晶界变形损伤本构模型 , 2014,21(2),13-19,39 ,DOI:10.3969/j.issn.1007-2012.2014.02.003, ISSN:1007-2012
85. 纯钛压缩变形下的晶体塑性有限元分析 , 2013,20(1),95-99 ,DOI:10.3969/j.issn.1007-2012.2013.01.020, ISSN:1007-2012
86. 纯钛板材冷拉深成形过程中的组织与性能 , 2010,17(3),93-97 ,DOI:10.3969/j.issn.1007-2012.2010.03.018, ISSN:1007-2012
87. 局部加载控制不均匀变形与精确塑性成形研究进展 , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2008,15(2),6-14 ,DOI:, ISSN:1007-2012
88. 率相关晶体塑性在有限元应用中的关键技术 , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2008,15(1),7-13 ,DOI:, ISSN:1007-2012
89. 芯辊进给速度对环件冷轧工艺的影响规律 , 2005,24(7),808-811 ,DOI:10.3321/j.issn:1003-8728.2005.07.014, ISSN:1003-8728
90. 材料参数对环件冷辗扩工艺的影响规律研究 , 2005,24(7),839-843,882 ,DOI:10.3321/j.issn:1003-8728.2005.07.023, ISSN:1003-8728
91. 宏细观本构关系数值化及其在有限元模拟中的应用 , 2007, ,DOI:10.7666/d.y1190070, ISSN:
92. 基于材料宏细观本构关系的环件冷辗扩模拟研究 , 2005, ,DOI:10.7666/d.y711897, ISSN:
93. 一种连续板带等厚面内弯曲成形方法 , 2013, ,DOI:, ISSN:
94. Microstructure evolution and flow localization characteristics of 5A06 alloy in high strain rate forming process , ELSEVIER SCIENCE BV,2014,81,1198-1203 ,DOI:10.1016/j.proeng.2014.10.097, ISSN:1877-7058
95. TA3钛合金高速变形的断裂机制(英文) , NORTHWEST INST NONFERROUS METAL RESEARCH,2015,44(09),2105-2108 ,DOI:, ISSN:1002-185X
96. Explicit incremental-update algorithm for modeling crystal elasto-viscoplastic response in finite element simulation , ALLERTON PRESS INC,2006,16(,1),S624-S630 ,DOI:10.1016/S1003-6326(06)60267-7, ISSN:1003-6326
97. A robust integration algorithm for implementing rate dependent crystal plasticity into explicit finite element method , PERGAMON-ELSEVIER SCIENCE LTD,2008,24(2),267-288 ,DOI:10.1016/j.ijplas.2007.03.014, ISSN:0749-6419
98. Research on the springback of thin-walled tube NC bending based on the numerical simulation of the whole process , ELSEVIER SCIENCE BV,2008,42(4),537-549 ,DOI:10.1016/j.commatsci.2007.09.001, ISSN:0927-0256
99. Technologies for advanced forming of large-scale complex-structure titanium components , Verlag Stahleisen GmbH,2011,,115-120 ,DOI:, ISSN:
100. TC11钛合金流变行为及其应变分段本构模型 , NORTHWEST INST NONFERROUS METAL RESEARCH,2012,41(3),397-401 ,DOI:10.3969/j.issn.1002-185X.2012.03.005, ISSN:1002-185X
101. Implicit algorithm and numeralisation of microscopic constitutive relations , MANEY PUBLISHING,2006,22(12),1401-1408 ,DOI:10.1179/174328406X150649, ISSN:0267-0836
102. 晶体材料细观本构关系数值化算法研究 , 2005,(中国太原),140-143 ,DOI:, ISSN:
103. Some advances in plastic forming technologies of titanium alloys , ELSEVIER SCIENCE BV,2014,81,44-53 ,DOI:10.1016/j.proeng.2014.09.127, ISSN:1877-7058
104. 不同工艺条件下TA15钛合金的三态组织中两种片层α相的演化(英文) , NORTHWEST INST NONFERROUS METAL RESEARCH,2015,44(03),527-531 ,DOI:, ISSN:1002-185X
105. 基于晶体塑性有限元方法的不同变形状态下织构演化预测(英文) , 2012,(S2),222-231 ,DOI:, ISSN:1003-6326